Excerpt to come
NEW: 5.4 mW Siemens SGT-A05 KB7HE Gas Turbine Generator / 2022
request info call 303-809-1189 8 units available now
ETA new 2027-2028 –
The SGT-A05 is an aeroderivative gas turbine delivering 4–6 MW electrical output with high efficiency and rapid start-up capabilities. Its lightweight, modular design supports decentralized power, co-generation, and emergency applications under diverse environmental conditions.
It features versatile fuel compatibility, including dual-fuel and low-BTU gases, and offers Dry Low Emissions (DLE) and Wet Low Emissions (WLE) combustion systems. Engineered for reliability, it enables extended hot section life, easy maintenance, and turnkey package solutions for industrial, oil & gas, and mobile power deployment.
Siemens SGT-A05 KB7 Gas Turbine Mobile Generators
Power Rating: Rated electrical power output: ~5.4 MW (5,400 kW) — the KB7’S are hot products, extremely in-demand and will not last long, contact us today for more info on these turbine generators!
(8) Siemens A05 Turbines
Model Year: 2022. New surplus (O hours)
Model: KB7
Immediate availability, Direct delivery from Manufacturer
Quotation US-251200:
December 10, 2025
Eight (8) Siemens SGT-A05 KB7HE’S Mobile Power Packages Available
Units are new and have never been installed.
Powered by the Allison 501 aero-derivative gas turbine
(Year of Manufacture 2022) currently stored in Germany
Output power ISO Conditions: 5,400 kW, 13.8 kV, 60 Hz
Class: Aeroderivative gas turbine (compact industrial power plant)
- Power: ~5.4 MW generator output
- Fuel: NG, diesel, dual fuel (mid-BTU/field gas support)
- Features: Fast start, black start, flexible operation, modular design
- Ideal uses: Distributed power, CHP, peaking, emergency backup
General Description
- Industrial aeroderivative gas turbine generator package
- Single-shaft configuration
- Designed for distributed power, CHP, and fast-response generation
Electrical Output
- Rated power (ISO, simple cycle): ~5.4 MW (5,400 kW)
- Frequency options: 50 Hz or 60 Hz (generator dependent)
- Generator type: Synchronous, air- or hydrogen-cooled (package dependent)
Performance
- Electrical efficiency (ISO): ~32 %
- Heat rate: ~11,150 kJ/kWh
- Pressure ratio: ~13.9 : 1
- Start-up time: Full load achievable in approximately 60 seconds
Fuel Capability
- Natural gas
- Liquid fuel (diesel/distillate)
- Dual-fuel operation
- Capable of mid-BTU and field gas (configuration dependent)
Emissions Options
- Dry Low Emissions (DLE)
- Wet Low Emissions (WLE – water or steam injection)
- Emissions compliance dependent on fuel, configuration, and local regulations
Operational Characteristics
- Fast start and rapid load acceptance
- Load-following capability
- Black-start capable (with auxiliary systems)
- Suitable for continuous, peaking, or standby duty
Mechanical & Design
- Aeroderivative core
- Modular construction
- Compact footprint relative to output class
- Packaged as skid-mounted or mobile configuration (site dependent)
Applications
- Distributed generation
- Industrial power supply
- Combined Heat & Power (CHP)
- Emergency and standby power
- Mobile or temporary power installations
SGT-A05 Variant Context and Models
- KB5S: ~4.0 MW
- KB7S (this unit): ~5.4 MW
- KB7HE: ~5.8 MW (higher efficiency variant)
Typical Package Scope
- Gas turbine
- Generator
- Inlet air system
- Exhaust system
- Lube oil system
- Control system
- Enclosure (weatherproof or acoustic, configuration dependent)
More details and a photo from the Siemen’s spec sheet is below:
Dimensions and Weights:
- Approx. weight 35,000 kg (85,980 lb)
- Length 9 m (29.5 ft)
- Width 2.7 m (8.9 ft)
- Height 3.1 m (10.2 ft)
Specifications:
- A05 Siemens aero-derivative gas turbine package
- Gas Requirements – Modular DLE Turbine
- Max flow rate per turbine: 40-60 mcf per hour
- Supply Pressure 270 – 280 psi
- Min gas temperature 36F above Dew Point
- Max gas temperature 200F
- Min/Max LHV 800 – 1100 Btu
- Wobbe Index 1170 ±130 Btu/SCF
- Max Liquids No liquids/Moisture/Oils permissible
- Max particle size 1μm
- Fuel Ethane Content <10%
- ISO Conditions Gas Turbine Rating Standard is at Sea Level and 59° F
Industrialized Aeroderivative Gas Turbine
Fast start-up and flexible generation including multiple starts, fast ramp-up and down.
Originally developed for use in aviation, SGT-A05 gas turbines are flexible, compact and lightweight designs that are ideally suited for decentralized power generation offering high efficiency and fast start up capabilities.
Designed for use in power generation and oil & gas applications, features of the SGT-A05 gas turbine include:
- High electrical efficiency
- SGT-A05 KB7HE aeroderivative gas turbine
- SGT-A05 Aeroderivate Gas Turbine
- Dependable, flexible design for CHP applications
- Lightweight modular construction
- Ease of field repair
- Black start capability
- Hot start capability
- Full power available within 60 seconds
- Load following
- Wide range of fuels in any environmental condition
request info call 303-809-1189 8 units available now
Sources: ironplanet.com, rwgroup.com — unit photos coming soon.